ADE Intellisense Dual Tech PIR Passive Motion Sensor Alarm

Honeywell ADE Intellisense Dual Tech PIR Passive Motion Sensor Alarm

The Honeywell DT7450-EOL Dual Tech Intruder Alarm Motion Sensor is designed for tough commercial environments and features a powerful 15m x 18m Range.

NOTE: This Model has been replaced by the DT8016F5. Therefore you may receive the New Updated Model.

Advanced DualCore Signal Processing
Dual-core processing from Honeywell is a truly powerful system and includes features such as concurrent diagnostics, digital fluorescent light interference filter, digital adaptive microwave threshold, adaptive baselines, and bi-directional temperature compensation.

Superb Detection Through K-Band Technology
K-Band microwave technology delivers sharp detection without holes or weak spots. The custom made source offers pattern shaping to fill the protected area with a broad, balloon-shaped pattern which matches the PIR pattern. It also offers pattern containment to reduce the penetration of microwave energy through walls.

Self-Testing for Consistently Reliable Operation 
Concurrent diagnostics assure optimum performance and reliability. Self-testing is performed upon power-up and at least once every hour on the PIR, microwave, PCB circuitry and temperature compensation circuitry.

DualCore Signal Processing 
PIR and microwave signals are analyzed in the microcontroller in multiple domains, including amplitude, time, frequency and duration to provide superior false alarm immunity without compromising detection. DualCore processing not only supports alarm functions, but also advanced temperature compensation, diagnostics, and false alarm features.

Uniform Sensitivity Optics 
The custom-designed Fresnel lens provides the same sensitivity for human targets at the edge of the pattern as exists directly in front of the sensor, giving the DT7450-EOL consistent coverage throughout the protected area.

Main Features:

• Advanced PIR sensor for commercial environments
• Dual-core signal processing
• K-band microwave technology
• Sensitivity Optic technology
• EOL resistors included

Technical Specification:

• Range: 15 x 18 m
• PIR Sensitivity: Low (3-5 steps), High (1-3 steps)
• Frequency: 24.200GHz (K-Band)
• Mounting Height: 2.3m optimal
• Power Requirements: 7.5 – 16V dc, 25 mA typ., 30mA max at 12V dc, AC Ripple: 3V peak-to-peak at 12V dc nominal
• Alarm Relay: Form A (NC) / 125mA@25 Vdc, max. 20 Ohm, protective resistor
• Tamper: (NC) 50mA, 24V dc - Cover & wall-removal
• Operating Temperature: -10°C to +55°C
• Temperature Compensation: Advanced dual slope
• Relative Humidity: 5% - 95% non condensing
• RF Immunity: 30 V/m from 10MHz to 1000 MHz
• PIR White Light Immunity: 6,500 Lux typical
• Dimensions (H x W x D): 119 x 71 x 42 mm
• Weight: 185.5g

Comes with a 1 Year Manufacturer's Warranty from Honeywell

Specification/Data Sheet